Inicio / Equipos / Liofilizador con taponado automático — pequeño/mediano (FDG) / Freeze Dryer - Lyophilizer
SED-0.5FDG-Z
Consultar
SED-0.5FDG-Z
SED · SED-0.5FDG-Z · Destacado
SED-0.5FDG-Z — Freeze Dryer - Lyophilizer
La descripción completa de este modelo aún se está traduciendo. Consulte los detalles en inglés o solicite información a nuestro equipo. English
The SED-0.5FDG-Z is a GMP/FDA/CE-certified pharmaceutical production vacuum freeze dryer with 0.5 m2 of shelf area (3+1 shelves,410x410 mm),featuring fully integrated CIP (Clean-in-Place) and SIP (Steam-in-Place) systems
Plazo de entrega
Consultar
Capacidad de producción
10–100 botellas/min
Funcionamiento
To reduce material loss risk while lowering operating costs, the freeze dryer vacuum, refrigeration, and circulation systems each employ a dual-system configuration with mutual backup. If one unit fails, the other starts automatically to ensure the freeze-drying program is completed. PID-regulated silicon oil circulation controls shelf temperature. Two BITZER single-machine two-stage refrigeration compressors provide redundant cooling for the shelf (indirect refrigeration) and condenser (direct refrigeration). Two dual-stage rotary vane vacuum pumps (Leybold, Germany) maintain system vacuum. The CIP system uses standard + wide-angle + ball-type spray nozzles for dead-angle-free cleaning. The SIP system achieves sterilization at 121 degC using pulsed negative-pressure steam delivery.
Proceso de funcionamiento
1To reduce material loss risk while lowering operating costs, the freeze dryer vacuum, refrigeration, and circulation systems each employ a dual-system configuration with mutual backup.
2If one unit fails, the other starts automatically to ensure the freeze-drying program is completed.
3PID-regulated silicon oil circulation controls shelf temperature.
4Two BITZER single-machine two-stage refrigeration compressors provide redundant cooling for the shelf (indirect refrigeration) and condenser (direct refrigeration).
5Two dual-stage rotary vane vacuum pumps (Leybold, Germany) maintain system vacuum.
6The CIP system uses standard + wide-angle + ball-type spray nozzles for dead-angle-free cleaning.
7The SIP system achieves sterilization at 121 degC using pulsed negative-pressure steam delivery.
Especificaciones técnicas
Especificaciones de la variante: SED-0.5FDG-Z
Especificaciones
Modelo
SED-0.5FDG-Z
Capacidad de producción
10–100 botellas/min
Tensión
380V
Suministros
380 V 3-phase 5-wire 10 kW power; compressed air 0.7 MPa 20 L/min; cooling water 5 m3/h; steam 130 degC 0.4 MPa 500 kg/batch; defrost water 500 L/batch at 65 degC; jacket cooling water ~1 m3
Detalles de conformidad
FDA 21 CFR Part 11 compliant control software; IQ/OQ/PQ validation documents; GMP and GB/T5226.1-1996 design/manufacturing standards
Potencia
10 kW
Presión de aire
0.7Mpa
Dimensiones
Longitud
1800 mm
Anchura
1100 mm
Altura
2000 mm
Peso
1800 kg
Materiales
Materiales en contacto
316L stainless steel (chamber inner, shelf); AISI 304 SS (condenser, cold trap coil)
Materiales del cuerpo
304 stainless steel (outer); 316L stainless steel (chamber, shelf)
Características principales
Shelf effective area: 0.5 m2; layers: 3+1 (top as radiation/compensating layer); shelf size: 410x410 mm; shelf spacing: 80 mm
Shelf temperature range: -55 degC to +80 degC (no load); condenser minimum temperature: <= -75 degC (no load)
Ultimate vacuum: <= 1 Pa (no load); system leak rate: <= 5x10^-3 Pa.m3/sec
Shelf temperature control accuracy: +-0.5 degC (PID regulated); shelf temperature uniformity: <= +-1 degC (stabilized)
Shelf flatness: <= +-0.5 mm/m; shelf withstands pressure test up to 0.3 MPa
Dual-redundant refrigeration: 2 x BITZER S4T-5.2Y single-machine two-stage compressors; R507/R404A refrigerants; water-cooled condenser (Nanjing Jindian); cooling water 5 m3/h
Dual-redundant vacuum: 2 x dual-stage rotary vane vacuum pumps (Leybold, Germany)
Dual-redundant circulation: 2 x Grundfos (Denmark) wet-rotor canned circulating pumps; silicon oil (25 degC, 10 cst); heating power 3.2 kW; solid-state relay control
Hydraulic stoppering: cylinder at top of chamber; adjustable stoppering pressure 0-1.0 bar; ROKEN hydraulic valves; IFM/HUBA pressure sensors
CIP system: standard + wide-angle + ball-type spray nozzles (316L SS); ~80 L/min water consumption; alternating left/right shelf nozzle; nitrogen charging valve
SIP system: pulsed negative-pressure steam delivery; sterilization at 121 degC; 30 degC to 121 degC within 30 min; jacket water cooling for chamber
Special O-type door seal to prevent water accumulation and ensure sterility
Chamber, shelves, and flexible hoses leak-tested by helium mass spectrometer
Control: SH-HPSC-IV cabinet; MCGS touch screen; Dell computer (Hite software); SANTAK UPS (sustains PLC 20 min after power failure)
FDA 21 CFR Part 11 compliant; electronic signatures; three-tier user access; unmodifiable curve reports
Unlimited recipe management; stage-jump function; real-time recipe adjustment during process
Complete batch record printing (process recipe, data curves, history, operation/alarm logs)
IQ/OQ/PQ, FAT, SAT validation documentation provided
Contact material: 316L stainless steel (chamber, shelf); outer: 304 SS; cold trap: AISI 304 SS
Dimensions (L x W x H): ~1,800 x 1,100 x 2,000 mm; weight: ~1,800 kg; installed power: 10 kW
Power: 3-phase 5-wire 380 V; compressed air: 0.7 MPa 20 L/min; steam: 130 degC 0.4 MPa
Complies with FDA/EU standards; electronic signature; multi-group password protection
System operation from cleanroom, machine room, or freeze-drying control room with mutual interlocking
User-friendly HMI showing all component/valve status, temperature and vacuum parameters
Recipe management for unlimited freeze-drying process curves
Stage display and arbitrary stage-jump function during freeze-drying
Real-time recipe adjustment during freeze-drying process
Alarm display for all fault points on operation screen
Data and curve recording functions; callable and printable by batch number
Multi-color vacuum/temperature curve display with show/hide toggle per channel
Complete batch record printing after freeze-drying completion
Online CIP with fully automatic control
FDA 21 CFR Part 11 compliant software; unmodifiable curve reports
Electronic signatures; three-tier user access management
UPS emergency power sustains PLC and sensors for 20 min after power failure
Aplicaciones
Pharmaceutical vial lyophilization
Biopharmaceuticals
Sectores
Farmacéutico
Marcas de componentes
BITZER
DANFOSS
Castel
DANFOSS
ZOER
DANFOSS
DANFOSS
DANFOSS
DANFOSS
BITZER
DANFOSS
DANFOSS
DANFOSS
LR/REFCO
ZOER
ROKEN
IFM/HUBA
SH-HPSC-IV
MCGS
UPS
SANTAK
CHINT
CHINT
CHINT
SED
Hable con SED Sales Team
Especialistas en equipos · contacto por WhatsApp
Consulte el horario y la disponibilidad del equipo
Conformidad
GMP
CE
FDA
ISO 9001
Limpieza y mantenimiento
In-place CIP: standard + wide-angle + ball-type spray nozzles ensure no dead corners inside chamber. Intermittent cleaning mode ensures pressure and effectiveness while reducing cost. Water consumption ~80 L/min.
Documentación
Ficha técnica (PDF)
Resumen del equipo, especificaciones y dimensiones · Documento original (inglés)
Solicitar al equipo comercial
Manual del operador
Instalación, funcionamiento y diagnóstico · Documento original (inglés)
Solicitar al equipo comercial
Ficha comparativa (Estándar y Económica)
Comparación de configuraciones · Documento original (inglés)
Solicitar al equipo comercial
Protocolos IQ / OQ / PQ
Documentación de validación para conformidad GMP · Documento original (inglés)
Solicitar al equipo comercial
Protocolos FAT / SAT
Pruebas de aceptación en fábrica y en sitio · Documento original (inglés)
Solicitar al equipo comercial
Planos CAD (STEP / IGES / DWG)
Planos de ingeniería para la instalación · Documento original (inglés)
Solicitar al equipo comercial
Certificados de calibración
Nivel sonoro, resistencia de tierra, rigidez dieléctrica y rugosidad · Documento original (inglés)
Solicitar al equipo comercial
DQ (cualificación del diseño)
Protocolo completo de cualificación del diseño · Documento original (inglés)
Solicitar al equipo comercial
Certificados de materiales
Composición del acero inoxidable 316L · Documento original (inglés)
Solicitar al equipo comercial