Ausstellung in Ontario, Kalifornien · Support am Zielort anfragen
Startseite / Maschinen / Heiz- und Aushärteofen / Gas-Fired Curing Oven (Heating and Curing Bake Oven)
SED-6-2-2.2RJGK-A
Auf Anfrage
SED-6-2-2.2RJGK-A
SED · SED-6-2-2.2RJGK-A · Hervorgehoben

SED-6-2-2.2RJGK-A — Gas-Fired Curing Oven

Die vollständige Beschreibung dieses Modells wird noch übersetzt. Lesen Sie die englischen Details oder fragen Sie unser Team nach weiteren Informationen. English

SED-6-2-2.2RJGK-A gas-fired curing oven (dryer / curing bake oven). Floor-mounted in-line chamber design minimizes on-site installation work and heat loss. Inner and outer walls in galvanized steel sheet with 120 mm insu

Lieferzeit
Auf Anfrage
Durchsatz
20 min

Funktionsweise

RS34 gas burner combusts natural gas or coal gas in a sealed combustion chamber. The heat source indirectly heats the circulating air via an air heater. The heated air is distributed as a hot-air circulation loop throughout the effective curing zone in the drying chamber, continuously and uniformly heating workpieces. Exhaust and fresh air exchange maintain contamination-free conditions. Temperature control: digital dual-point intelligent temperature controller with sensors measures and controls temperature automatically; over-temperature safety probe provides protection.

Prozessbeschreibung
1RS34 gas burner combusts natural gas or coal gas in a sealed combustion chamber.
2The heat source indirectly heats the circulating air via an air heater.
3The heated air is distributed as a hot-air circulation loop throughout the effective curing zone in the drying chamber, continuously and uniformly heating workpieces.
4Exhaust and fresh air exchange maintain contamination-free conditions.
5Temperature control: digital dual-point intelligent temperature controller with sensors measures and controls temperature automatically; over-temperature safety probe provides protection.

Technische Daten

Technische Daten für Variante: SED-6-2-2.2RJGK-A

Technische Daten

Modell
SED-6-2-2.2RJGK-A
Durchsatz
20 min
Spannung
380V±10% 50Hz/
Versorgung
Power 380V ±10% 50Hz 3-phase 4-wire or 3-phase 5-wire, 7.5 kW; compressed air 0.5–0.7 MPa (oil ≤0.1 ppm, moisture ≤1.3 g/m³); natural gas or coal gas fuel supply
Konformitätsangaben
Process temperature 220°C; curing time 20 min; insulation layer 120 mm; combustion chamber mineral wool insulation 200 mm (100 kg/m³); compressed air oil content ≤0.1 ppm, moisture ≤1.3 g/m³
Leistung
7.5 kW
Luftdruck
0.5~0.7 MPa

Abmessungen

Länge
6000 mm
Breite
2000 mm
Höhe
2200 mm
Aufstellfläche
L6000 × W2000 × H2200 mm (outer dimensions)

Werkstoffe

Kontaktwerkstoffe
Galvanized steel sheet (inner wall)
Gehäusewerkstoffe
Galvanized steel sheet (inner and outer walls); A3 steel plate; mineral wool insulation 100 kg/m³

Wesentliche Merkmale

Gas-fired heating (natural gas or coal gas)
Indirect hot-air circulation heating
Floor-mounted in-line (pass-through) chamber structure
120 mm mineral-wool insulation layer
RS34 gas burner
Digital intelligent dual-point temperature controller
Automatic over-temperature safety protection
Uniform internal temperature distribution
Clean hot-air — no contamination in curing zone
Floor-mounted in-line design reduces installation work and heat loss
Clean hot-air environment — no contamination in curing zone
Uniform internal temperature
Automatic temperature measurement and control — reliable and sensitive

Anwendungen

Curing
Heating and curing
Workpiece drying

Branchen

Industrial curing
Drying equipment applications

Komponentenhersteller

Gas burner: RS34 (domestic / China)
Circulating fan: domestic (China)
SED
Sprechen Sie mit SED Sales Team
Maschinenspezialisten · Kontakt per WhatsApp
Geschäftszeiten und Verfügbarkeit beim Team erfragen

Dokumentation

Datenblatt (PDF)
Überblick, technische Daten und Abmessungen · Originaldokument (Englisch)
Beim Vertrieb anfragen
Bedienhandbuch
Einrichtung, Betrieb und Fehlersuche · Originaldokument (Englisch)
Beim Vertrieb anfragen
Vergleichsdatenblatt (Standard und Economy)
Vergleich der Konfigurationen · Originaldokument (Englisch)
Beim Vertrieb anfragen
IQ / OQ / PQ-Protokolle
Validierungsunterlagen zur GMP-Konformität · Originaldokument (Englisch)
Beim Vertrieb anfragen
FAT / SAT-Protokolle
Abnahmeprüfungen im Werk und vor Ort · Originaldokument (Englisch)
Beim Vertrieb anfragen
CAD-Zeichnungen (STEP / IGES / DWG)
Konstruktionszeichnungen für die Aufstellung · Originaldokument (Englisch)
Beim Vertrieb anfragen
Kalibrierzertifikate
Schallpegel, Erdungswiderstand, Spannungsfestigkeit und Rauheit · Originaldokument (Englisch)
Beim Vertrieb anfragen
DQ (Designqualifizierung)
Vollständiges Designqualifizierungsprotokoll · Originaldokument (Englisch)
Beim Vertrieb anfragen
Werkstoffzeugnisse
Zusammensetzung des Edelstahls 316L · Originaldokument (Englisch)
Beim Vertrieb anfragen
SED
WhatsApp · SED Vertrieb
Vertriebskontakt · WhatsApp
→