صالة عرض في أونتاريو، كاليفورنيا · استفسر عن الدعم في وجهتك
الرئيسية / المعدات / خلاط ثنائي الأبعاد / Mixer — Two-Dimensional Mixing Machine
SED-12000EH-H
حسب الطلب
SED-12000EH-H
SED · SED-12000EH-H · مميز

SED-12000EH-H — خلاط ثنائي الأبعاد

لا تزال ترجمة الوصف الكامل لهذا الطراز قيد العمل. راجع التفاصيل بالإنجليزية أو اطلب المعلومات من فريقنا. English

SED-12000EH-H Two-Dimensional Mixing Machine. The drum simultaneously moves in two directions: rotation of the drum, and swinging of the drum with the swinging rack. Total volume 12,000 L; loading volume 6,000 L; loading

مدة التسليم
حسب الطلب
الطاقة الإنتاجية
9600–57600 kg/hour

مبدأ العمل

The drum rotates while the swinging rack moves it back and forth. Materials inside rotate, over-turn, and simultaneously move back and forth with the drum swinging. With these two combined motions, materials are fully mixed in a short time. Widely used for blending powder and granular materials.

وصف سير العمل
1The drum rotates while the swinging rack moves it back and forth.
2Materials inside rotate, over-turn, and simultaneously move back and forth with the drum swinging.
3With these two combined motions, materials are fully mixed in a short time.
4Widely used for blending powder and granular materials.

المواصفات الفنية

مواصفات التكوين: SED-12000EH-H

المواصفات

الطراز
SED-12000EH-H
الطاقة الإنتاجية
9600–57600 kg/hour
المرافق
Electric power for rotation motor(15 kW) and swing motor(11 kW). Total: 26 kW.
تفاصيل المطابقة
Explicitly NOT explosion-proof; cannot be used in explosion-proof production. Warranty 12 months from installation, max 16 months after delivery. Lubricate all rotating parts every 3 months. Transmission mechanism bearings should be filled to 2/3 with grease after every repair. Do not make adjustments while machine is running. Electrical lines should be kept dry.
القدرة
26 kW

الأبعاد

الطول
4860 mm
العرض
2800 mm
الارتفاع
4200 mm
مساحة التركيب
Overall size: M=4860 mm(length), B=2800 mm(width), H=4200 mm(height); A=3400, C=360, D=1910 mm. Whole-in-position installation; below 60 L no anchor bolts needed. Floor unevenness must be < 3/1000. Gap between machine base and ground must be eliminated. Add rubber anti-shock pad(10–16 mm) if frame shakes during no-load test.

الخصائص الرئيسية

Drum simultaneously moves in two directions: rotation and swinging
Drum supported by four wheels with axial orientation by two block rounds
Two of four support rollers driven by rotating power system
Swinging rack driven by crankshaft swinging rod mechanism mounted on the frame
Swinging rack supported on frame by bearing components
Total volume 12,000 L; loading volume 6,000 L; max loading weight 4,000 kg
Overall size M=4860 mm, B=2800 mm, H=4200 mm, A=3400, C=360, D=1910 mm
Motor: rotation 15 kW + swing 11 kW(total 26 kW)
Below 60 L models do not need anchor bolts
Pre-limited maximum speed protects against operator over-speeding
Magnetic control startup; adjustable mixing time with auto-stop
Two-axis motion enables fast, thorough blending in short cycle time
Suitable for both powder and granular materials
Magnetic control with timer-based auto-stop

التطبيقات

Blending of powder materials
Blending of granular materials

القطاعات

الأدوية
SED
تواصل مع SED Sales Team
متخصصو المعدات · تواصل عبر واتساب
استفسر عن مواعيد العمل وتوفر الفريق

الوثائق

ورقة البيانات (PDF)
نظرة عامة على المعدات والمواصفات والأبعاد · المستند الأصلي (الإنجليزية)
اطلب من فريق المبيعات
دليل التشغيل
التركيب والتشغيل واستكشاف الأعطال · المستند الأصلي (الإنجليزية)
اطلب من فريق المبيعات
ورقة مقارنة (قياسي واقتصادي)
مقارنة التكوينات · المستند الأصلي (الإنجليزية)
اطلب من فريق المبيعات
بروتوكولات IQ / OQ / PQ
وثائق التحقق لمطابقة GMP · المستند الأصلي (الإنجليزية)
اطلب من فريق المبيعات
بروتوكولات FAT / SAT
اختبارات القبول في المصنع وفي الموقع · المستند الأصلي (الإنجليزية)
اطلب من فريق المبيعات
رسومات CAD (STEP / IGES / DWG)
رسومات هندسية لتخطيط المنشأة · المستند الأصلي (الإنجليزية)
اطلب من فريق المبيعات
شهادات المعايرة
مستوى الصوت ومقاومة التأريض والعزل وخشونة السطح · المستند الأصلي (الإنجليزية)
اطلب من فريق المبيعات
DQ (تأهيل التصميم)
بروتوكول كامل لتأهيل التصميم · المستند الأصلي (الإنجليزية)
اطلب من فريق المبيعات
شهادات المواد
تركيب الفولاذ المقاوم للصدأ 316L · المستند الأصلي (الإنجليزية)
اطلب من فريق المبيعات
SED
واتساب · مبيعات SED
التواصل مع المبيعات · واتساب
→